NCB Diesel - Intercoolers and Pipes

BD exhaust manifolds have heavy walled elbow connections preventing burning out, plus, hold in exhaust gas temperatures enhancing turbine pumping efficiency while the runners have been optimized to improve velocity and evacuate the cylinders. Manifolds are coated to resist corrosion and are pre-drilled for pyrometer probes. BD's exhaust manifolds are not only built to last, they are designed for the most optimal flow performance. The 304 Stainless Steel feed pipes are mandrel bent flow designed to improve exhaust velocity and turbo response time. Kit comes with exhaust manifold gaskets, turbocharger pipe gaskets and A/C offset adapter to eliminate damaging the A/C hose.

Nothing can put an end to a quarter mile pass or hill climb faster than a turbo hose that blows off. Now, you can eliminate this problem with BD's hose and clamp kits. BD boots can withstand over 100 psi of boost and are secured by rugged, spring-loaded, stainless steel clamps. Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel.

Designed through testing at 130+ psi turbo boost pressure and 500-degree F turbo outlet temperatures, our extra thick cast end tanks with support struts have integrity and long life without ballooning and cracking. Curved cross sectional extruded tubes allow additional air flow to the radiator versus square bar and plate designs giving 57% more cooling surface, more power and better fuel economy. Xtruded core and cast end tanks withstand over 130psi of boost for your street or race truck. The tubes have a 0.025" wall thickness and designed enhanced inner fins that add to performance and already strong support structure resulting in a 95% heat conductivity transfer. No cracking or separation occurred when tested at over 400 psi. Colder intake air temperature results in lower EGT's. BD's free flowing Charge Air Cooler (CAC) design with streamlined external air passages improves engine cooling while offering less fan noise and less blade resistance, plus, improving engine power and efficiency of the radiator and air conditioning heat exchangers.

The 304 Stainless Steel feed pipes are mandrel bent to improve exhaust velocity and turbo response time. Kit comes with exhaust manifold gaskets, turbocharger pipe gaskets and A/C offset adapter to eliminate damaging the A/C hose.

Mishimoto has developed a cold-side intercooler pipe and boot kit for the 2008-2010 6.4L Powerstroke.The factory pipe and boot features numerous restrictive bends and does not stand a chance against the heat and pressure of your high-powered 6.4L; upgrade to the Mishimoto kit for increased reliability, durability, and performance.The Mishimoto cold-side pipe is made right here in the USA, and is constructed of mandrel bent aluminum with a polished finish.The Mishimoto cold-side pipe eliminates restrictive bends in the factory pipe, which allows for improvements in airflow, power, and EGTs.This kit includes Mishimoto silicone boots with DuraCore technology.Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots.Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil.This effectively increases the life of our boots by preventing leaks and blowouts.To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power.This cold-side pipe and boot kit is the perfect addition to the Mishimoto 6.4L Powerstroke performance intercooler and includes our signature lifetime warranty.

Mishimoto has developed a hot-side intercooler pipe and boot kit for the 2008-2010 6.4L Powerstroke. The factory pipe and boot features numerous restrictive bends and does not stand a chance against the heat and pressure of your high-powered 6.4L; upgrade to the Mishimoto kit for increased reliability, durability, and performance. The Mishimoto Cold-Side Pipe is constructed of mandrel bent aluminum with a polished finish. The engineers at Mishimoto designed this kit to be a two piece pipe kit, compared to the factory one piece pipe, allowing for much easier installation and removal. The Mishimoto Hot-Side Pipe eliminates restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs. This kit includes Mishimoto Silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto Constant-Tension T-bolt Clamps for accurate and consistent holding power. This hot-side pipe and boot kit is the perfect addition to the Mishimoto 6.4L Powerstroke Performance Intercooler and Mishimoto 6.4L Powerstroke Cold-Side Intercooler Pipe and Boot Kit. It is made in the USA and includes the Mishimoto Lifetime Warranty.

Mishimoto has released a performance intercooler for the 2008-2010 Ford 6.4L Powerstroke.Your 6.4L needs an intercooler that can effectively reduce intake temperatures and withstand high boost pressures.The Mishimoto 6.4L Powerstroke intercooler is manufactured with heavy-duty cast aluminum end tanks and a durable bar-and-plate core, designed to decrease intake temperatures, improve airflow, and reduce pressure drop.By reducing pressure drop this intercooler will extend the life of your turbocharger and improve the efficiency of your Powerstroke.The Mishimoto Powerstroke intercooler features an increase in core volume compared to the factory cooler, which results in improved performance and lower EGTs.We engineered this intercooler to provide substantial benefits on a stock truck and also to support the power and boost levels of a highly modified truck.Whether you take your truck to the strip or to the job site, the Mishimoto intercooler is an ideal upgrade for the factory intercooler.Offered in black or silver, the Mishimoto 6.4L Powerstroke intercooler is protected by our signature lifetime warranty.

Mishimoto has released a performance intercooler for the 2008-2010 Ford 6.4L Powerstroke.Your 6.4L needs an intercooler that can effectively reduce intake temperatures and withstand high boost pressures.The Mishimoto 6.4L Powerstroke intercooler is manufactured with heavy-duty cast aluminum end tanks and a durable bar-and-plate core, designed to decrease intake temperatures, improve airflow, and reduce pressure drop.By reducing pressure drop this intercooler will extend the life of your turbocharger and improve the efficiency of your Powerstroke.The Mishimoto Powerstroke intercooler features an increase in core volume compared to the factory cooler, which results in improved performance and lower EGTs.We engineered this intercooler to provide substantial benefits on a stock truck and also to support the power and boost levels of a highly modified truck.Whether you take your truck to the strip or to the job site, the Mishimoto intercooler is an ideal upgrade for the factory intercooler.Offered in black or silver, the Mishimoto 6.4L Powerstroke intercooler is protected by our signature lifetime warranty.